Showing posts with label pda android. Show all posts
Showing posts with label pda android. Show all posts

BoxWave Skinny Capacitive Stylus for Acer Iconia Tab A100 - Acer Iconia Tab A100 Touch Screen Stylu

BoxWave Skinny Capacitive Stylus for Acer Iconia Tab A100 - Acer Iconia Tab A100 Touch Screen Stylus w/ Longer Barrel and Fine Tip PointI purchased an iPod ITouch from Amazon and was not happy with just charging using the computer. Also I wanted to be able to charge it away from home, when I travel, when I am flying, and this works great! I highly recomend this charger to anyone. It has two charging speeds which is nice. The only draw back is the length of the retractable charging cord. It is only about 2 feet long, and that can cause a bit of a problem locating a close by wall outlet. It still works great and I love it!

Save 40% Off

Fellowes PDA Micro Keyboard for Palm V & Handspring Visor

Fellowes PDA Micro Keyboard for Palm V & Handspring VisorIt looks very nice with my Handspring. The stand on the back is useful but folds away into the botten without trouble. I've been surpised at the ease at which entering stuff has been with 2 fingers (or however many you want). I've accutally written a single page letter to my Brother without any trouble. I don't use Hot Sync as much anymore. Been pretty happy with mine =)

Having received a Handspring Visor for Christmas, I went a little crazy and bought myself this keyboard. Overall, it is useful, but there are difficulties: Used on a smooth surface, the PDA support, doesn't; and the near-corner keys (cap lock and right-arrow) are so stiff, you need a mini-sledge to get them to register. It will do for now, but I will probably look for a setup that is not as likely to drop or damage the PDA.

Buy Fellowes PDA Micro Keyboard for Palm V & Handspring Visor Now

SanDisk USB CompactFlash and Secure Digital/MultiMedia Memory Card Reader

SanDisk USB CompactFlash and Secure Digital/MultiMedia Memory Card ReaderSo two things happened that [were bad]:

1) I bought a laptop, not realizing that it didn't have a floppy drive.

2) My digital camera came with a secure digital card that was WAY too small to be useful (16MB), and I immediately replaced it with something practical. Now what to do with that tiny little card?

Needing a way to transfer files at home and at work, I bought this great little card reader. I love it!!

The set up was a little shaky; I couldn't get get it to work and it kept crashing my computer. After about 10 minutes of this, I put the card back in the camera, reformatted it, and PRESTO! Works great, and with XP required no set up software. I can hardly believe something this useful is also so [inexpensive]. I guess they figure they'll make money selling bigger cards.

I like the Sandisk 2 In 1 USB Reader for Compact Flash and Secure Digital cards. What can I say, it does what it supposed to do, and does it well.

Buy SanDisk USB CompactFlash and Secure Digital/MultiMedia Memory Card Reader Now

Samsung Galaxy S3 siii leather case - Horizontal Pouch Type (Black) GT-i9300 - PDair

Samsung Galaxy S3 siii leather case - Horizontal Pouch Type GT-i9300 - PDairI am a fan of old school leather cases. The pouch fits the phone well eventhough I have a slim plastic case on it too. I like using the clip to secure it to my belt because it is very sturdy. The snap works well and the leather is great quality. I was impressed by the packaging too. Well done. Great Case!

I have purchased these cases for my last 2 devices. My LG G2X and now my SGS3. They are of superior quality. The stitching is strong, and the phones fit perfectly...even with a gel case. They attach to the belt snuggly and leave no fear of detachment. This is important to me as I ride my motorcycle for my daily commute.

I attempted to "cheap out" with another case http://www.amazon.com/gp/product/B007VOM0R4, and it worked for the excruciatingly long time this product takes to ship. Huge problem with that product is it had a metal "rivet" where the snap was on the front of the case. Jagged metal edges protruded to the inside of the case where the phone is held. Not good. I used a piece of duct tape to cover it while I used it awaiting this case.

Pros:

Great quality case.

Good stitching

Secure on belt and the magnetic clasp and strap that hold the phone in.

Cons:

Expensive (you get what you pay for in this instance)

Shipping takes a looooooong time. 2 1/2 to 3 weeks on my order.

Buy Samsung Galaxy S3 siii leather case - Horizontal Pouch Type (Black) GT-i9300 - PDair Now

rooCASE Netbook Carrying Bag for ASUS Eee PC 1015T-MU17-BU 10.1-Inch Netbook Blue - Classic Series

rooCASE Netbook Carrying Bag for ASUS Eee PC 1015T-MU17-BU 10.1-Inch Netbook Blue - Classic Series Dark Blue / BlackGood quality and sturdy. The case looks thin, but surprisingly, everything fits: 10 inch net book (with a chunky replacement battery), AC adapter power cords, wireless mouse and even a compact cooling fan. Great Buy!!!

Save 67% Off

Toshiba Satellite T115-S1100 11.6-Inch Netbook Carrying Case (Deluxe Bag - Black)

Toshiba Satellite T115-S1100 11.6-Inch Netbook Carrying CasePerfect bag for carrying the toshiba satellite T115. Not much extra room for mouse and charger, but they do fit. Will not carry much extra in the way of books or papers if you're looking for a college goer.

Save 33% Off

Palm TX Handheld with Hard Case

Palm TX Handheld with Hard CaseThis item bundles the two essential items you need immediately with your new Palm: screen protectors (3) and a sturdy highly protective case. The well designed case is lightweight, sleek and slim, and is made specifically for the TX. This case is easy to slide into your pant/jacket pocket, it will hold two memory cards, provides high protection from spills (it completely encloses the Palm), and unlike many other hard cases, the lid swings a full 360 around to the backside so you can hold the palm as if it were not in case at all!! The Palm swings on a hinge to allow you to plug things in while the TX is still attached to the hinge.

Outstanding product. If you are considering purchasing the Palm TX, this product is precisely that but accompanied by a metal case for the handheld. For the same price as the Palm TX alone, you get the case free. If you prefer, buy the Palm TX and spend an additional $40 for the case.

This is a well kept secret, and a real buy. For some reason, I could find no mention of this combination package on the Palm website nor amy indication that it is available anywhere except through Amazon. Even on their site I only found it in looking for accessories.

Buy Palm TX Handheld with Hard Case Now

I'm a long-time Palm user with limited money to spend tech-toys, so I have to make my investments count. Most recently, I had a Palm Zire 72 that I have absolutely worn out. Awesome machine that I needed to replace.

I purchased the Palm TX after much thought and review. I find it as easy as my Zire was with some neat enhancements and great tools -and some odd hitches.

First off: WiFi. Easy to connect, easy to use, smooth and fast. Blazer is a dream and the combination make it my favorite way to browse Bloglines.

The switchable views, landscape to portrait and back, smooth and nice. Combined with my Palm Keyboard, I have a useful writing platform for just about any situation.

I know the Palm OS is old, but this did have some nice improvements over my three-year-old Zire:

I like that I can click and hold the "Home" Button to instantly switch between applications, without having to go through the "Applications" menu.

What I don't like: Versa Mail. I cannot get it to work to save my life, and Palm has been little help. I've given up for the moment and use Blazer and Gmail for my emailing needs.

I don't like that Blazer does not support uploads, which is an issue for me.

I also don't like that two security upgrades were not installed on the system when I unboxed. I have yet to install the second -which cost $5, by the way -because it requires a full reset and I will have to reset my preferences and third party applications by hand. Both security upgrades should have been part of the ROM from the very beginning.

All in all, however, quite pleased with this.

Read Best Reviews of Palm TX Handheld with Hard Case Here

I had to replace a Treo accidentally damaged. I found after trying it that having both phone and PDA in one unit was unsatisfactory for me, largely because the unit was too bulky to wear comfortably on my belt. Going back to a tiny phone (Razr) and separate PDA has been a relief. And what a PDA. This unit comes without a keyboard, but the virtual keyboard is so easy to access and the graffiti writing recognition system has been so improved, that I don't notice the absence of the keyboard most of the time. Adequate memory, expansion card slot, and excellent resolution of the LCD screen are all bonuses. And the hard case even has two slots for keeping extra memory cards handy. I have a language translation card and a game card handy all the time now, and not separately stored.

Want Palm TX Handheld with Hard Case Discount?

I bought the PDA instead of the Treo because I didn't want to pay for a data plan as well as a voice plan. I chose the Palm TX with the hard case because it could go online, keep my calendar, lists, memos, and Office documents/sheets.

Overall, it works well. I haven't used the Office stuff much, but the Word works well. The colors are bright on the screen and the different apps are fairly easy to get too. It is a bit of a bummer that you have to go back to the main page/table of contents in order to get to another application.

The hard case works well although it is slippery. Plus, it's hard to get open at first. Remember to push the side with the arrow back a little bit.

I like my purchase and it does make my life easier. I wish it would stay on longer though.

Save 49% Off

rooCASE Neoprene Netbook Sleeve Case Cover for HP Pavilion dm1-3210us 11.6-Inch Laptop (Invisible Z

rooCASE Neoprene Netbook Sleeve Case Cover for HP Pavilion dm1-3210us 11.6-Inch LaptopWell designed and holds the netbook comfortably without nicking it when zipping shut. Holds her bulky power cord and has room for papers and such. Not very many red cases let alone like this.

Save 70% Off

Belkin Ultimate Wireless Keyboard and Case for iPad 2, 3rd Gen and 4th Gen with Retina Display

Belkin Ultimate Wireless Keyboard and Case for iPad 2, 3rd Gen and 4th Gen with Retina DisplayCustomer review from the Amazon Vine Program Oh my goodness, I love this thing! I've used three different regular cases, a mini bluetooth keyboard, and a keyboard/case combo. I did not expect this to be vastly different from the other keyboard case that I tried.

First of all, this is a hard case. It does not flex. The other keyboard case that I tried was rigid/stiff, but it could flex a tiny bit. That means that when closed, part of the keyboard could make contact with the iPad screen. Maybe that's nothing, but I don't like anything that isn't soft touching the iPad's screen. This case was built with close tolerances. When closed, the keyboard comes very close to the screen, but does not touch it. If you hold it up to the light, you can see the tiny separation. If you don't believe your eyes, you will find that you can slide a sheet of paper between the keyboard and iPad when the case is closed.

The bluetooth syncing/linking was easy. Also, there is no physical switch to turn the keyboard off and on like there was on my other keyboard case. The keypad is engaged when the keyboard is in one of its three possible reclining positions. The case magnetically "snaps" into one of the three reclining positions. Snap it out and bluetooth goes off. No more worrying that you forgot to turn off the bluetooth switch.

There are two trade-offs. A trade-off is not a flaw. It is a feature whose existence means that something else is necessarily lost or diminished. For some, trade-offs are good, and for others not so good. For me, both trade-offs are good.

Trade-off #1: The sound deflector over the speakers directs sound toward the user. It amplifies it a little and also makes it quieter for those who are not in front of the device. A larger deflector (including your own cupped palm) does the job better, but then it would look ugly and get in the way. I prefer a deflector that does a moderate job but is unobtrusive and looks good. That's better than one that works great but looks like a bullhorn stuck on your case.

Trade-off #2: The case is not hinged. That means it does not open predictably like a book. The two portions of this case are "tethered" together by a strong, wide, and thin material. This makes it easier for butterfingers to fumble with, but it allows the case to do something that a hinged case cannot do. You can flip the keyboard section in back of the iPad section with the keys facing away from you or toward you. In this configuration, the sections are "stacked". It's like folding a magazine so that the rest of the magazine is behind the page you are reading. But a magazine is hinged. The part folded back is always facing away from you. Another way to say it is that you can flip the keyboard directly behind and parallel to the iPad, with the keys facing away from or toward the iPad. I much prefer the keys to be facing toward the iPad. That way, my fingers are contacting the smooth outer case instead of the keys on the keyboard. Bravo. I like this tethering feature, even if it does require one to be a little more careful.

How about the feel of the keyboard? No complaints.

Scratching? I tend to treat my electronic stuff with care. But I'm not a fanatic about it. I do a normal amount of sliding it around (metal side down) on tables and such. There is no scratching that I can see.

While in the library using my iPad to do word processing with Pages 09, I felt like taking a break and browsing a bit. I wondered if I could stand it up in portrait orientation. I expected it to utterly fail as it was not designed to do this. But much to my delight, it can stand up on its side. Sure, it stands vertically (can't tilt the screen), but I tend to slink down in my chair when I relax so it was no problem!

Finally, this case looks good. It looks cool. It's slimmer than even the non-keyboard cases I've used. The smooth finish and the perfect way it mates up with the iPad is something to admire. I have an urge to show it off. OK, it's more than just an urge I show it off whenever the I get the chance :-)

Customer review from the Amazon Vine Program When I slid this case out of the box I was impressed how sleek and well-constructed it is. The closed case is 3/4" thick. One side is satin finish aluminum that holds the keyboard. The other side is a sturdy plastic frame with a large rubberized plastic panel and hinge. The iPad snaps into that side and is held securely but is easy to remove and replace. The rubberized panel provides a good grip when holding the closed case.

There are three magnetic slots behind the keyboard that lock the iPad frame into one of 3 viewing angles. These slots double as on/off switches for the keyboard. Once you pair the keyboard with your iPad it will automatically connect in seconds when you place the cover in one of the slots and disconnect when removed.

The back of the iPad is completely enclosed and protected while allowing full access to all controls, ports and cameras. The case also has wake/sleep magnets. Because the aluminum side of the case holds the keyboard it is the bottom and placing it on a rough surface can scratch the case.

My iPad 4 in this case weighs 2 pounds 6 1/2 oz., 6 oz. heavier than in a leather folio case without a keyboard. You can fold the iPad over the keyboard to use as a tablet or hold as a reader but you can really feel that extra 6 oz. when holding it so it is not practical to use that way. Unfortunately there is no portrait orientation for this case.

The full qwerty keyboard is small but has a good feel and is easy to use. There are shortcut keys for cut, copy, paste and search. Also keyboard volume, play/pause forward and reverse. There is a home screen key and a microphone key that will bring up Siri.

This case provides great protection and would be a good choice for someone who needs to carry their iPad for school or work. I like the convenience of a keyboard and think this case is the best available.

Buy Belkin Ultimate Wireless Keyboard and Case for iPad 2, 3rd Gen and 4th Gen with Retina Display Now

Customer review from the Amazon Vine Program The Belkin Belkin Ultimate Wireless Keyboard and Case for iPad 2, 3rd Gen and 4th Gen iPads performs exactly as advertised. It has a complete wireless QWERTY keyboard, about 10% smaller than the standard keyboard that is surprisingly responsive and comfortable to type on, with a bit of adjustment. It mates with the iPad via standard Bluetooth pairing. Out of the box, it literally takes but a few seconds to have your iPad snapped into the plastic top holder and paired with the keyboard. There is no on-off switch. Simply set the back containing the iPad into one of three small notches in the keyboard/base unit and the keyboard is powers up. Take the iPad out of a slot and the keyboard goes off. Removing the iPad is also a snap.

The unit is charged via a USB cable and claims to be good for 160 hours. I have no idea if that is true or not, but I have not had to charge it since the first time, and I've had it for couple of weeks (but I often use the iPad for reading with the keyboard folded with keys facing the the back of the iPad and therefore "off" ).

With the iPad set at one's desired angle (there are 3), the keyboard and iPad so resembles my MacBook Air that I keep looking for the track pad. There isn't one however, and it takes a bit of getting used to the thing to know when to touch the screen and when to use the keyboard. There are a number of function keys that are similar to those on a regular Mac keyboard for controlling sound (which is actually better with the case's little baffle that directs the sound forward than it is with a naked iPad), video and a home key that takes the place of the home button on the iPad. The arrow keys make editing text MUCH easier than the touch-drag and release that one must use on the touch screen itself. There is no manual (at least none that I could find, but there probably ought to be) to explain what some of the other function keys do. I am still discovering little surprises (e.g.., space bar returns you to the last open app when the iPad goes to sleep) and I expect to discover a few more.

The keyboard/case is reasonably light for the strength and protection afforded by its aluminum base, and the self contained keyboard, but it is heavier than the heavy duty Snuggs leather case that was the iPad's previous home. The keyboard folds out of the way in back of the iPad for reading, but the resulting sandwich is less comfortable for reading than with the iPad in my Snuggs case or caseless.

The biggest drawback is that the keyboard is 10% smaller than a regular keyboard so for (rather lame) touch typists like me, switching back and forth between the Belkin keyboard and one of my regular computers is (at least with my rather limited experience) troublesome. Maybe that will go away with more use.

Bottom line: The Belkin adds a considerably amount of functionality to the iPad for e-mail and text-based apps like Pages. Without it, one is basically reduced to typing with one or two fingers. With it, one can begin to approach the texting ability of a laptop or desktop computer for many applications with the much smaller and lighter iPad. On one of my next trips, I think I'll leave the laptop at home and try just the iPad with the Belkin.

Recommended.

J.M. Tepper

Read Best Reviews of Belkin Ultimate Wireless Keyboard and Case for iPad 2, 3rd Gen and 4th Gen with Retina Display Here

Customer review from the Amazon Vine Program The Belkin Ulitmate Wireless keyboard connects via bluetooth to your iPad (2nd generation or later) and allows you to use it more like a traditional laptop. With more companies issuing tablets to their mobile workforce, this sort of accessory is extremely beneficial just ask anyone who has spent a day attempting to write emails or take meeting minutes via the on-screen keyboard.

The Belkin connected very easily to both my iPad 2 and 3, with each recognizing it almost instantly and mating to the keyboard with just a single press of a button. The keyboard itself is understandably smallish, but the keys themselves have good feel and action. The presses are perfectly responsive on the tablet's display as well. In short, it works very well as a keyboard for your iPad.

Where the Belkin really shines is in its weight it literally weighs almost nothing. It is also much thinner than other keyboard cases that I've used, e.g. the Zagg. My wife instantly swapped out her Zagg for this one based on this difference and hasn't looked back since. I was concerned about durability due to this light weight, but the Belkin has made several trips so far with no issues.

Your iPad slips into the case to cover and protect the back of the tablet. It has all of the necessary holes to uncover the camera, speakers, port, etc. It was easy to swap the tablet into and out of the cover, but the fit while in place was snug. The exterior of the case is silver aluminum, similar to the back of an iPad itself. This was the only problem with the keyboard case this aluminum cover scratches and scuffs easily. In fact, my case already had some buffing (looked like light sanding marks) on its exterior just from shipping. I can imagine that with heavy use, this effect will only get worse.

The case charges via an included USB cable. Battery life is good vs. other keyboard cases I've used.

Overall, the Belkin functions very well as a keyboard and also as a case provided you value lightweight portability over eternally shiny good looks.

Want Belkin Ultimate Wireless Keyboard and Case for iPad 2, 3rd Gen and 4th Gen with Retina Display Discount?

Customer review from the Amazon Vine Program There are times when the iPad's on-screen keyboard just is not sufficient and a "real" keyboard is necessary. This device is well thought out and works great in that regard. The case does a good job protecting the iPad which snaps snugly into one side. The unit took a minute or two (and being opened / closed a couple times, there is no "on" switch) to activate but from then on pairs automatically. The design is very clever in that the cover can be opened completely and folded behind the iPad to use it normally or can magnetically attach at 3 points to adjust viewing angle when used like a laptop with the keyboard.

I compare directly to the Zagg keyboard which I have for an iPad1 which was not bad but this is far superior I had been searching for a keyboard for my iPad3 and this fits the bill perfectly. The Zagg unit clips over the old iPad1 and the lip of that makes it difficult to type on like typing in a bowl. This unit lays flat and also by attaching to the iPad is much more stable. It allows the iPad to be used just like a laptop.

Overall, I am very happy with this unit and would highly recommend it.

Rosewill RCP-E150C 150W Can Sized Silence Car Inverter with 1 Amp USB Port

Rosewill RCP-E150C 150W Can Sized Silence Car Inverter with 1 Amp USB PortIt works, just like every other power inverter. The 5 watt USB port is awesome. AC port is 30 watts short of being able to power my new laptop. :(

I often travel long distance and always bring my laptop, printer and other electronic stuffs with me. I have a 400 watts inverter, but fan noise really drives me crazy. I am sensitive to noise and who is not? It's nothing worst than listening to music with mixing fan noise. With passive cooling system, I expect it to be overheated someday although it hasn't happened with me yet. Perhaps, I haven't overloaded it. During my previous 6 hour trip, it stayed cool all the time. Overall, it fits my needs.

Pros: Zero noise.

Cons: Its shape is funny and easy to roll around. The blue light is too bright.

Buy Rosewill RCP-E150C 150W Can Sized Silence Car Inverter with 1 Amp USB Port Now

It worked as described but unfortunately I bought this for a friend who needed a battery for the car so they could work while driving to vacation.

Read Best Reviews of Rosewill RCP-E150C 150W Can Sized Silence Car Inverter with 1 Amp USB Port Here

We ordered and inverter for traveling with grandchildren. The inverter is a life safer! The children can charge their elecontronics while traveling in the car. The item was shipped, on time, great packaging and brand new as advertized. I would buy from this seller again.Rosewill RCP-E150C 150W Can Sized Silence Car Inverter with 1 Amp USB Port

Want Rosewill RCP-E150C 150W Can Sized Silence Car Inverter with 1 Amp USB Port Discount?

We carry this in the car for vacations and travel with the grandkids. They always need to charge some USB device while we travel. They can also run some of their games on the AC power and connect the video outputs of their games to the vehicle's video LCD screen system. This keeps them entertained on long trips. This is also handy to power an AC light if you need to work on your vehicle in case a problem occurs.

This inverter is about the diameter of a coke can and is light in weight. (Less than a pound) It has an AC outlet, a USB power outlet rated at one amp that will charge and Apple iPod Touch or an iPhone and it has an on/off switch.

Analyze your power needs before you buy one.

Save 39% Off

CLIE PEG-N610C/V Purple Handheld

CLIE PEG-N610C/V Purple Handheld
  • Stylish color PDA
  • 8MB, Palm OS software
  • gMovie player, Jog Dial
  • Expansion slot
  • What's in the box: Clie Handheld, USB HotSync Cradle, Detachable AC Adapter, Stylus, Installation CD-ROM, Applications Manual, Graffiti Sticker, Protective Cover, Top Cover Piece

I spent months deciding which PDA to get. I wanted to see the second-gen Pocket PCs before I did anything.

Ultimately it came down to reliability, bells & whistles, and cost. I'm the first to admit I love gadgets. So I was mightily tempted by the current crop of PocketPCs, particularly for their gaming ability. Face it: this generation of Palm PDAs--even the ones with the Dragonball 33 mhz processor like the Clie--can't compare to the 206 mhz 32-bit StrongARM-powered PocketPCs when it comes to animated gaming. The Clie's 33 mhz 16-bit CPU simply lacks the horsepower for realistic animation. The same goes for video. So if it's important to you to be able to play action games on your handheld or watch movies on a tiny screen, by all means get a Pocket PC.

If you want to use your PDA for business, understand that Pocket PCs are still toys for adults. Business users should get a Palm OS PDA. And if you're going to get a Palm OS PDA, the Clie 610c (or 760c) is the way to go.

This may sound like blasphemy to Clie fans--Sony is trying to position the Clie 6-and 7-series PDAs as multimedia machines to compete with Pocket PC. But they really can't compare in that regard for the reason I noted above. (You can listen to music on your 760c, though.)

So why the Clie, with its Palm OS, instead of Pocket PC for business? After all, Pocket PCs will sync with your Windows apps, right? Pocket Outlook, Pocket Word, etc must be a more seamless match than Palm's 3rd party apps, right? Wrong. Pocket Outlook is a brain-damaged version of the real thing. Just try sync-ing subfolders. It's not gonna happen. Same with Pocket Word. You lose all your formatting. Meanwhile Palm OS has 3-4 different 3d party apps that sync with each program, and allow you to retain your subfolders and formatting. And these are just examples. The Palm business apps really are better--for now.

Then there's reliability. The dreaded Blue Screen of Death should be all-too familiar to all Windows users. Guess what? Now you can have the Blue Screen of Death right in your Pocket. Imagine how much fun you'll have when you're on the road and your Pocket PC requires a hard reset and you lose ALL YOUR DATA and you can't restore it from your desktop because you're, as I said, ON THE ROAD. Pocket PC's are as unstable as their pre-Windows XP big brothers. In my view, they are not stable enough for serious business use. Palm OS, by contrast, is rock-solid.

Cost is also a factor. Personally I can easily afford the [the price] of a 2nd-gen Pocket PC, but for what purpose? I would have a very expensive Gameboy Advance, and I would still need a REAL PDA for work.

What really sets the Sonys apart from the crowd of Palm OS PDAs is their incomparable screens. The Clie 610c and 760c use the same screen technology as the Compaq Ipaqs--universally cited as the best in the Pocket PC world. And the Sonys posess even higher resolution than PocketPCs (320 x 320 vs 320 x 240). All the other Palm PDAs are still stuck with relatively dim 160 x 160 displays (OK, the Handspring Prism isn't dim, but it is still low-res). But the numbers don't begin to tell the real story. The 610c's display is bright with 64K colors, readable in daylight, and razor-sharp . You will never go back to a monochrome unit once you've used the Clie.

Clie also has a jog-dial. It sounded handy before I tried it, but after using it: big deal. A non-issue. Clie also looks cooler than other Palm PDAs, but that's just my opinion.

As for support, I confess to being among the very first PEG 415 users, as I ordered one direct from Sony the day it came out. The 415 has a 320 x 320 16-shade grayscale screen in a beautiful brushed aluminum body that is a bit over 1/2 as thick as a 6or 7-series Clie. Unfortunately, the 415's screen is so dim it is almost unreadable in ordinary light, even with the (weak) blue-green backlight on. (...)

As for expandability: you're pretty much limited to the memory stick. There is an MP3 player add-on for the 610c, but if you wanted MP3 you would have bought a 760c in the first place. The memory stick itself is excellent, and cost is now comparable to other flash memory. But if you want a GPS unit or some other specialized add-on, you'd better go with a Handspring.

Battery life on the Clie 610c is excellent, particularly compared to Pocket PCs. I routinely use it for 2-3 days without charging it, and the battery life has always remained above 3/4. It would probably last over a week with a single charge.

Construction is very sturdy. I haven't had a problem with dust under the screen as reported by some Ipaq users.

The bottom line is, the Clie PEG 610c's multimedia abilities are oversold, but its beautiful display, Palm OS and apps, and compact size make it the best choice for a business user. Pocket PCs are undeniably better at multimedia, but they still aren't reliable enough for business use. My suggestion: give Microsoft a pass this time and check back in a year or two. By then Pocket PCs may be ready for prime time, or Palm may well have overburdened its simple, stable OS with a plethora of features in an effort to match Microsoft, making Palm OS just as unstable as Pocket PC. Either way, you'll be ready for a new machine by then, anyway. For now, though, Palm OS is the only real choice for business, and the Clie 610c is the best Palm OS PDA out there.

Buy CLIE PEG-N610C/V Purple Handheld Now

I have a PEG-N710C, which is the same as this model, but includes the MP3 player functionality, which can be added to this one as an option. This is a wonderful PDA. The resolution is amazing and much better than its Palm or Handspring competitors. Photos can be downloaded and viewed with brilliant clarity. The memory stick slot is very handy for storing applications, MP3 files, or pictures. Memory sticks can be shared between the PDA and other Sony electronics. I have a Sony digital camera as well and it is very helpful to be able to use my memory sticks in both the camera and the PDA. Applications cannot be run directly from the memory stick but pictures and MP3 files can be directly accessed. The processor is fast, the UI is great, the unit is lightweight, and I have had nothing but good experiences with Sony support.

Read Best Reviews of CLIE PEG-N610C/V Purple Handheld Here

I have owned a Palm m105 for quite sometime now. I was bored to tears with it though and rarely used it. it was dim screened, slow, and the screen was small.

I am very happy with my Sony CLIE' 610c. this is the clearest, and fastest Palm available that I have found. with 16-bit color, I have pictures of my daughter on it, and show them off instead of carrying them in my wallet.

People "ooh" and "Ahh" over that! Its a great device, I definatly recommend it to anyone looking to buy a personal organizer.

I dont regret purchasing it at all.

Want CLIE PEG-N610C/V Purple Handheld Discount?

I put off buying a PDA for the longest time until I saw the Clie'. Nice graphics and fairly easy to use. The Clie's lightweight and small package size is great for somebody who does not want to be burdened with bulk vs. features. Another plus is the versatility of expansion utilizing Sony's memory sticks. This will allow you up to 128 mb of additional storage. If you use your Clie' as a GPS you can store a lot of maps on one or multiple memory sticks. Since I am into video production I see the audio or lack of, as the only drawback in that the clips play VERY well visually but there isn't any audio. If you wanted to run a quick demo for a client they can see the visual but not hear it in the Clie's standard configuration. Audio can be added as an option for about $125. The internal batteries also do not seem accessible by the consumer so I would surmise that I would loose the use of my Clie' while it was in having it's batteries changed. With the few drawbacks I have stated I feel that the Clie' is still a worthwhile investment.

When I saw a demo unit of this beauty sold for only $250 at CompUSA, I could not help me to get one to upgrade my aging Palm IIIx. Overall, it is a worthy ugrade. Here are what I like and not:

What I like:

1) best screen I've ever seen, bright and Hi-Res, it is great to shot off your photos;

2) Jog-dial is easy for one hand operation;

3) long battery life;

4) very stylish;

5) Memory stick what! Did say Memory stick is good? Yeah, you bet. Comparing with CF, it is small. Size does matters. I guess it is why Palm uses SD or MMC, but they are more expensive than MS. Again, MS is not Sony-only any more. I use Lexar and I see SanDisk out there too;

6) 8MB is enough if you know how to use MS with MsMount, and you will never short of storage. I recommend not-so-big 32MB since this one can not be used as a MP3 player.

What I don't like:

1) clip-on cover sucks, fall off too often, why Sony can not give us one come with Sony T-series?

2) lack of better font support to take full advantage of the great hi-res screen;

3) lack of lock mechanism for MemoryStick, I often accidently knock it out, although no harm to Palm OS at all.

4) a bit heavier than what I like, a form factor like T615 will be perfect (T615 is expensive and its buttons are too bad). In fact size and price are my main objections to Pocket PC devices.

5) lack of accessaries, I lost my stylus, Guess what? I can not find a replacement form local stores. Since Sony is relatively a newcomer comparing with Palm and HandSpring, it surely will be better over time;

6) don't bother with palm Desktop software come with Sony, it is slow and has problems with Avantgo, and can not sync with Netscape Mail. Download version 4.0.1 from palm instead.

Sleek Impact-Resistant Cover Case with Accessory Genie Stylus for AT&T HTC One VX

Sleek Impact-Resistant Cover Case with Accessory Genie Stylus for AT&T HTC One VXworks fine and easy to put on and is very sleek it doesn't add any more weight to the phone

Great case for this phone. Underestimated the product initially and just picked up a quick case without digging too deep and was very surprised with this. Great finish and fits really well to the phone. Keep up the good work :D

Buy Sleek Impact-Resistant Cover Case with Accessory Genie Stylus for AT&T HTC One VX Now

This case is light weight, fits well, slips right on and off and looks nice too. Great for the price and a very simple, sleek case.

Read Best Reviews of Sleek Impact-Resistant Cover Case with Accessory Genie Stylus for AT&T HTC One VX Here

I bought this for my husbands new HTC smartphone and he loves it. It makes the phone so easy to hold and hang onto as the HTC One VX is extremely slick. The stylus is perfect as he has really fat fingers.

Want Sleek Impact-Resistant Cover Case with Accessory Genie Stylus for AT&T HTC One VX Discount?

While all the openings line up alright, there is a strip along the bottom of the phone that is not covered by the material. Either it was not designed right or I got one where the mold was not quite full or something. It certainly does not fit as well as the one in the photograph. I find it hard to believe that it is by design since it looks stupid with that strip of the phone showing.

Save 90% Off

Brady TLS2200 Thermal Labeling System

Brady TLS2200 Thermal Labeling System
  • Portable label printer is a labeling tool for identifying a variety of items, like cables, file folders, and equipment
  • Prints on continuous tape and die cut labels
  • 203 dpi thermal transfer printing stays crisp and bright longer than direct thermal printing
  • TrueType fonts from 4 to 72 point, on materials up to 2" wide and print length up to 54"
  • ABC keyboard for simplicity

I've been using the Brady TL2200 for a few months now. Unfortunately I have to use it for my job. Here are the main reasons why I don't like this printer.

1. Cost. It's really expensive and if you think the printer itself is expensive, chew on this for a while: the labels I print use a spool of adhesive label "paper" (Brady Part #PTL-43-439) that is 50ft long. These spools of labels sell for around $90 a piece, which in my opinion is ridiculously expensive.

2. Ribbon. The ribbon cartridges that this printer uses are 1also unnecessarily expensive, 2very inefficient, 3not recyclable. Each ribbon cartridge costs about $25(Brady Part #R6010). Each cartridge has two spools, one full of unused ribbon which rolls across to the other spool as it gets used for printing. The problem with this method is that the majority of the ribbon itself never actually gets used at all and is wasted. And what's worse if, like me, you're printing off multiple labels with a gap between each label (for cutting) the ribbon actually rolls/transfers spools along with the label for the gap. In other words, if you have a 2 inch gap between labels, you are wasting 2" of your ribbon for every gap your labels require. One more thing about the labels the ribbon is very thin, and I found many spools where the ribbon had wrinkles in it. When you print labels that use wrinkled ribbon, you are left with a very sloppy looking label that has streaks across it.

3. Here's a rundown of my general gripes with the printer itself:

-The on/off button is very difficult to reach. You have to turn the printer upside down to get to it. Why they couldn't have just put this switch on the top or the side of the printer is beyond me.

-Currently, as of September 2009, this printer ships with a cable to connect it to a computer but the cable has a serial port at the end. Most computers made within the last couple of years don't even have serial ports anymore because everything is USB. I called Brady about this and they said they are considering changing the cable to USB for future models. In the meantime I'm stuck having to buy a $30 serial to usb adapter cable. Oh, one more thing about the serial cable. It connects to a port on the bottom of the printer yes, the bottom and there's no channel/grove on the bottom of the printer to allow the serial cable to run freely out and away from the printer. So you're left with a very wobbly printer that's sitting on top of the cable. It's just like sitting down to a very wobbly table at a restaurant.

-Possibly my biggest gripe: For my job, I have to print off, on average, 30 of each type of label I need. Since each of my labels are 4.75", I often run out of either ribbon, label paper, or both in the middle of a print job. Whether you're printing using the LabelMark software (included with the printer) or just the printer itself, when the machine runs out of anything it CANCELS your print job. This means that if you're printing off 30 labels and it runs out of ribbon halfway through, you have to replace the ribbon, count how many labels you did print, then start a new print job to get the remaining labels.

-There are issues where labels don't print clearly, and I even had an issue where only half of a label was printing. I was told by Brady to upgrade the firmware on the printer, which I did, and that seems to have fixed the problem.

4. LabelMark PC Software. The LabelMark software is finicky at best. The user interface is fairly simple to grasp, but I have a lot of issues with it far too many to get into here, but I'll sum it up by giving the LabelMark software itself 3 out of 5 stars.

5. Product Availability. A specific job I worked on required the use of Blue colored label paper spools. I placed the order with Grainger (a supply company that orders directly from Brady) for 60qty of these spools back in June. As of today (mid-September) I still haven't received any of the blue labels. I called Brady directly to find out what the problem is. Their rep was sympatheitc and explained that "ever since we moved our manufacturing down to Mexico, we've had all sorts of issues with keeping products in stock." And despite my order having been placed three months ago, they don't expect to have my blue labels in stock again for at least another month.

6. The good news. Numerous times I've had to contact Brady's tech support. So far, each person I've spoken with has been patient, professional, and actually helpful. I've also never experienced a long hold time to reach someone. And, the best part is that they all speak clear English.

The bottom linethis printer is very, very poorly designed, as are all of its required parts (label paper, ribbon, cables, etc.). The folks who designed it apparently didn't take cost or common sense into consideration.

Buy Brady TLS2200 Thermal Labeling System Now

1. The label make is WAY over priced.

2. The labels are WAY over priced.

3. The ribons are WAY over priced

4. The software to print from a computer is WAY over priced.

5. The printer jams up, skips labels, gets off track regularly so the overpriced labels and ribbons are wasted often.

DO NOT BUY THIS LABEL MAKER!

Read Best Reviews of Brady TLS2200 Thermal Labeling System Here

The cost of the Brady labels are so extreme you'll have sticker shock. I was just quoted a price of $775 per box for the TSL2200 label. We've used the TLS thermal printer for years. Though it works well most of the time the price of the replacement labels is just too expensive. Time to find a new labeling system. Due to the price I wouldn't even give this product 1 star.

Want Brady TLS2200 Thermal Labeling System Discount?

Save yourself a ton of work by printing all of your labels in advance. Very spendy labels though.

Came with everything you need to get going.

Save 9% Off

I bought that label printer to replace the existing one in our company which was the same model.

We are very satisfied with the Brady printers

Wolverine PASS -100 Portable Battery Powered Hand Held Document Scanner

Wolverine PASS -100 Portable Battery Powered Hand Held Document ScannerThis scanner doesn't take up hardly any space and weighs next to nothing. It sits in my briefcase, unnoticed, until I need to scan something. It takes a few seconds to slip it from its carry pouch, slide it across the sheet, book page, business card, photo, whatever, and I'm done. There's no need to connect it to a computer until I'm back in my office and need to download the stuff I've scanned.

One option is always to use my mobile phone and I've found that can take longer just to get the scan. Getting a document lying flat is occasionally a problem. Having the lighting sufficient and positioning the phone at the right distance so the image looks reasonably "square" and not having a shadow can be a real hassle (and sometimes impossible). I can make it a little better later with software and that adds even more to the time. With all that the results are never as good as with this scanner.

The scanner has a solid feel. I've been using it for about a year and it's still going strong. All I've had to do in that time is change the two AA batteries once.

BTW, I feel that honest, effective reviews can take the place of first-hand experiences that are lacking in online shopping. I've always appreciated the help I've received from other reviewers and work hard to return the favor as best as I can. I hope you found this review helpful and if there was anything you thought was missing or unclear leave a comment and I'll do what I can to fix it.

We are a private, non-profit social services agency. The most important part of our work is done in homes. There are also many requirements about current documentation, so we need something we can use in the field to collect the documents. This little scanner does a great job on everything from driver's licenses to full size sheets of paper. It is easy to calibrate and use; it is easy to keep with you; it makes great images; and it is completely self contained. You supply the memory card (up to 32g) and you're ready to scan. Then, when you return to your home or office, downloading is easy. We tried one, loved it and bought four more.

Buy Wolverine PASS -100 Portable Battery Powered Hand Held Document Scanner Now

I really like this scanner as it serves the purpose for which it was purchased. I wanted a scanner that would allow me to store copies of medical references (to avoid having to lug heavy reference books to printers & paying for copies, etc) as a medical student/intern. I am using a 32 GB level 4 SD card, which I formatted within the scanner itself before using (formatting instructions in the manual). Works beautifully! It is extremely legible as long as you do some practice scans. You can check your work the first few times you use this by either pulling out the SD card and inserting into your laptop, or by connecting the scanner directly to the laptop via supplied USB-2.0 cord. I have not tried this on photographs (other than the printed drawing on our church bulletin, the output for which was very good), but it can scan in either black/white or color mode in either 300 or 600 dpi, so I don't imagine it would be all that sharp for someone meticulous about scanned photographs... but for $50, one realistically should not expect too much these days.

Anyhow, I do emphasize that you practice the pace at which one should be gliding the scanner over a document, especially if the source is a magazine or book that cannot be flattened well enough. That way, you can avoid worrying about whether or not you captured the image as you like should your laptop not be available for a quick check in the future.

If I recall correctly, the image can be saved as either JPEG or PDF (JPEG for sure, the PDF part is the part I cannot recall).

It comes with a nice pouch for the scanner (no room for the cord, though). The interior of the pouch is that soft material that doesn't scratch the glass, and the top of which can be tightened with a draw-string. If you have a decent-sized laptop case (aka, NOT a minimalist-type case), this should be able to fit in there.

Read Best Reviews of Wolverine PASS -100 Portable Battery Powered Hand Held Document Scanner Here

I don't usually do reviews of what I purchase, but this scanner is wonderful. It works exactly as described and is extremely handy.

Want Wolverine PASS -100 Portable Battery Powered Hand Held Document Scanner Discount?

Great little product. It has better resolution than Fujitsu's ScanSnap S510, even at low resolution.

You can scan from top to bottom or from side to side. The scanner has little marks indicating the optical lens extension. The only drawback is you have to scan accurately and fast, as it only gives you a window of about 20 seconds per scan. You say that's enough? Not really when you're trying to be precise, which is why it has four stars. You really have to have good pulse and precise timing for fast enough scanning of documents. I placed electrical tape on the documents for them not to move, as I scan swiftly and straight any document.

Problem is more noticeable with documents such as forms, as lines appear moved. It's not so much a technical flaw, except for the scanning window frame, as it is a human fault for the image to appear slanted in some parts.

BoxWave Dell Streak Pro D43 Sketching Capacitive Stylus - Pencil-Shaped Dell Streak Pro D43 Capacit

BoxWave Dell Streak Pro D43 Sketching Capacitive Stylus - Pencil-Shaped Dell Streak Pro D43 Capacitive Touch Screen StylusI thought this would be a useful thing. Well I was wrong. I realized that the big plastic reel in the middle of the wire kind of sucked to have dangling while listing to music. If you can find a use for it then congrats. I used it for about a day.

Oh and the reel does stop working if you pull the wire too hard. Like if it gets caught on something because it's swinging around.

Save 35% Off

Replacement Battery for Sony Clie PEG-TJ27, PEG-TJ37

Replacement Battery for Sony Clie PEG-TJ27, PEG-TJ37
  • Sony Clie Battery Type: Li-Polymer
  • Volts/AmpH: 3.7V 750mAh
  • Replacement PDA Battery Designed for Sony Clie PEG-TJ27, PEG-TJ37
  • Part No. UP553048-A6H
  • Brand new, 1 year warranty!

Used it with my PEG-TJ37 and worked just fine. My original batery only worked for about 20 minutes and died and now back to normal again

Buy Replacement Battery for Sony Clie PEG-TJ27, PEG-TJ37 Now

This fit perfectly into my Clie. The one i purchased did not have instructions on how to install which would have been helpful. I saw an improvement in my battery life, but not as much as I had hoped for. It did fit and work once installed.

Read Best Reviews of Replacement Battery for Sony Clie PEG-TJ27, PEG-TJ37 Here

The battery pack was shipped promptly and was as advertized. I was particularly appreciative of the verbal installation help I received before purchasing it.

Want Replacement Battery for Sony Clie PEG-TJ27, PEG-TJ37 Discount?

It's great to have my palm pilot up and running again without having to recharge it everytime I use it! Thanks for the quick service too!!

rooCASE Samsung GALAXY Tab 3 7.0 / 8.0 / 10.1 Executive Portfolio Leather Case

rooCASE Samsung GALAXY Tab 3 8.0 SM-T3100 / SM-T3110 Executive Portfolio Case Cover - BlackI'm surprised by the quality of this case for this reasonable price. From the packaging to the construction, it is clear that this is not a cheap, flimsy case but rather one that is well-constructed and well-thought out. The part that fits around the tablet fits well, with cutouts perfectly positioned for all the buttons, front and rear cameras, speaker, even microphone. It fits the tablet tightly and is secured by a cleverly hidden velcro tab.

The portfolio is also well constructed, with cushy leather. It zips very tightly around the tablet, so you won't be able to fit a lot else in, but it provides what appears to be excellent protection. The zipper and pulls appear to be durable. The stand connects by a ribbon flap, and is held flat magnetically. Again, all appears sturdy and the flap doesn't seem like it will dislodge itself and flap around, or get bent. The whole thing looks very professional and I won't be embarrassed or self-conscious to bring it to meetings, interviews, and the like.

Minor cons/points to note:

It makes the whole tablet heavy to carry around. But then, you expect real leather to be heavy.

It did have an initial chemical-ish smell which dissipated quickly.

The tablet case part does not cover the corners, so if you were ever to un-velcro the tablet case and use it on its own, if you drop it the corners will get dinged.

It can be hard to start zipping as the two zips can get a little stuck down near the fold of the portfolio. I imagine that will loosen with time.

The portfolio does not fold backwards on itself, so it is awkward to balance in one hand while writing on the tablet.

The pocket on the left side will not fit full sheets of paper, as this case is not letter-sized. You will have to fold them in half to get them to fit.

Overall I'm really satisfied with this purchase and would get it again.

I bought one of these cases after not being happy with a regular book style case that was advertised as made for the GALAXY Note 10.1.

I couldn't be happier with this case. It looks amazing and professional. Also, when it's all zipped up you can't really tell what's inside. It makes me feel safer carrying around a tablet (ya hear in the news how people are stealing them and beating people up when they know you have a tablet or expensive phone on you.)

It's stylish and it seems to be the most effective case on the market. The outter case zipps up completely and safe guards your Galaxy Note tablet 100% from anything getting inside and damaging it (Other cases that don't zip up allow paper clips or pens to slide in a scratch your tablet.) I also have a couple cats and I'm not worried if they run across the tablet anymore because it's all safe and zipped up in it's case.

It is also cheaper than almost every other case out there and the quality is really impressive. The leather (or pleather, IDK which it is) is thick and durable. This is not a cheap product!

You have access to all ports, etc; just like the description says. You can even get the S Pen out.

Bottom line, I'm ordering a second one for my mom who just got a Galaxy Note.

I hope others buy this product because I think they will be very happy with it.

Buy rooCASE Samsung GALAXY Tab 3 7.0 / 8.0 / 10.1 Executive Portfolio Leather Case Now

I had heard of rooCases before but never needed one until I got my tablet. This case is nearly perfect. Sturdy enough for travel. The actual tablet holder is excellent allowing access to ports and buttons. It may not be as flexible as other tablet cases as per positioning the tablet at various angles, etc., but the protection this case gives is more important to me.

Read Best Reviews of rooCASE Samsung GALAXY Tab 3 7.0 / 8.0 / 10.1 Executive Portfolio Leather Case Here

I have been using this for about 3 weeks now.

Provides excellent protection for my G10.1

Detachable inner sleeve provides best of both worlds comfort during indoor use & protection during travel (with zippered case)

Build Quality is excellent.

Cons :

Horrible Horrible smell when it arrived. Completely dissipated in 72 hrs, so not an issue after that.

No wrist strap.

Velcro life potential appears to be short. (yet to bee seen, no problems so far)

@rooCase your build quality is excellent, but a little more attractive design and the wrist strap would have made this product perfect. Maybe you can refer this

Want rooCASE Samsung GALAXY Tab 3 7.0 / 8.0 / 10.1 Executive Portfolio Leather Case Discount?

I bought this for my Galaxy Tablet 10.1 and couldn't be happier. It keeps the tablet secure with a very strong Velcro. The charger is in a bad spot because you can't close the case while charging, but who really cares about that? It keeps my notes, business cars and nic nacks organized all the while keeping my tablet safe from the elements. I am very pleased with my purchase. Amazon two day shipping on this was on the money too! Even the boxing was perfect Thumbs up all around!!

Save 70% Off

Acer Liquid Gallant Duo Leather Case - E350 - Flip Top Type (Black Crocodile Pattern) by PDair

Acer Liquid Gallant Duo Leather Case - E350 - Flip Top Type by PDairThis case arrived quickly and I am pleased with the flip cover and phone grip design combined. I could not find another case like it for this phone. Plus, it looks good.

rooCASE Dual View Vegan Leather Case for Kindle Fire

rooCASE Dual View Vegan Leather Case for Kindle FireThis is a nicely made case and I'm happy enough with it. . The front cover does not fold flush to the back of the case when you have the Kindle open to read, which I'd gotten used to with my old Kindle case. It also has no elastic straps to make sure it stays closed, which you can see in the pictures.

My biggest complaint is that I wish it had a loop to hold a stylus. I have to keep mine clipped to the front, which makes me afraid I'll lose it.

I ordered the case thinking it was for the HD Kindle Fire and was greatly disappointed when it was too small for what I had. I had to ship it back and ended up paying for something that was the right fit. I did get my refund but the cost of the shipping to return it was disappointing. But I understand it's business and was my error somehow.

thanks

Lenore

Buy rooCASE Dual View Vegan Leather Case for Kindle Fire Now

strong enought to protect Kindle Fire going back and forth each day on bus. Wish it had space to securly store my "kindle pen". Bought for female because of bright color and it's very nice.

Read Best Reviews of rooCASE Dual View Vegan Leather Case for Kindle Fire Here

BoxWave mini Capacitive NOOKcolor Stylus (Jet Black)

BoxWave mini Capacitive NOOKcolor StylusThe stylus is great. I am notorious for touching the wrong place on my screen...I guess my fingers are too big! Now I have complete control. I use the stylus with my Nook. I tied it to the hook on the left bottom corner of my Nook so it is always available. I left the cord long enough to reach the top of the Nook. It will also lay in the crease of my Nook cover when I close it. So convenient!

Both stylus and tether are too short to be really useful. That said, the thing works fine but waaay overpriced. Am using a stylus that I bought for a buck that is much handier.

Buy BoxWave mini Capacitive NOOKcolor Stylus (Jet Black) Now

I was a bit concerned while ordering it, but it really does work well. It doesn't drag very well, but it clicks on most any spot perfectly. The cord is a bit short, but I plan to replace it with elastic. A great size, very compact and fits in my Nook Color case.

Read Best Reviews of BoxWave mini Capacitive NOOKcolor Stylus (Jet Black) Here